ZTW brushless ESC
ZTW brushless ESC
SEAL 300A OPTO HV 14S

Product Item   SEAL 300A OPTO HV 14S
Model Number    6300400
Form Brushed / Brushless Brushless
  HV / Normal HV
Hardware Parameters Continuous Current (A) 300A
  Burst Current(A) 1000A
  Battery Cell (NiXX/Lipo) 18-42 NC/6-14 Lipo
  BEC output /
Dimensions Length 84mm
  Width 146mm
  Height 28.6mm
  Weight 640g
Wire & Plug Power Wire 8#AWG,160mm-Red/160mm-Black
  Motor Wire 8#AWG,160mm-Black
  Signal Wire 1 (Brown/Red/Orange)60C,add a special JR male connector at the end of 330mm wire
  Signal Wire 2 (Brown/Red/Orange)30C,add a special JR male connector at the end of 150mm wire
  Power Plug (Yes/No) no
Parameter programming Transmitter  yes
  Jumper  programming card   
  LCD programming card yes
  WiFi programming card yes
  USB adapter yes
Firmware Upgrade Firmware online
(Yes/No)
yes
Prog. Item
            
Tone of value


Prog.Item
BEEP- BEEP-
BEEP-
BEEP-
BEEP-BEEP-
BEEP-
BEEP-  BEEP-
BEEP-
BEEP— BEEP—
BEEP-
BEEP—
BEEP-
BEEP-
BEEP—
BEEP-
BEEP-
BEEP-
BEEP—
BEEP-
BEEP-
BEEP-
BEEP-
  1 short BEEP 2 short BEEP 3 short BEEP 4 short BEEP 1 long BEEP 1 long BEEP & 1 short BEEP 1 long BEEP & 2 short BEEPs 1 long BEEP & 3 short BEEPs 1 long BEEP & 4 short BEEPs
  Brake Type Brake OFF Soft Brake  Mid Brake  Hard Brake          
  Battery Type NiCd/NiMH LiPo LiFe            
  Cut Off Voltage Threshold 2.8V/50% 3.0V/60% 3.2V/65% No Protection          
  Restore Factory Setup Defaults Restore                
  Motor Timing Auto 15° 22° 30°      
  Motor Rotation Forward Reverse               
  Start Up Strength 10% 15% 20% 25% 30% 35% 40% 45% 50%
  Low Voltage Cut Off Type Reduce Power Cut Off  Power              
Default Brake Type:  Brake Off
Battery Type: LiPo with Automatic Cell detective
Cut Off Voltage Threshold:      3.0V/60%
Motor Timing:  Auto
Motor Rotation:  Forward
Start Up Strength:  30%
Low Voltage Cut Off Type:   Reduce Power

© Copyright © 2017 Shenzhen ZTW, Inc 粤ICP备10241327号